|
|
|
| Bulletin Borard |
|
|
FubarIII USB DAC with Headphone Amp.
|
|
FubarIO USB DAC/ADC
FubarIO is a High-Quality USB DAC/ADC Device.
Using Universal Serial Bus you can simply Plug and play without installing any drivers (with Linux, Mac OS or PC Windows system). Also adopting the full-duplex system which allows communication in both directions (digital signals and analogy signals) have the functions of recording and playing back in order to offer FubarIO to the consumers who have the demand of transfer cassettes and records to computer or CD.
|
|
| Specification |
* Amplifier Structure : Low pass filter with 2Vrms output
* Power Structure : Virtual-Ground power supply
* Playback Support Format : 16-bit, 32 / 44.1kHz / 48kHz
* Recording Support Format : 16-bit, 8 / 11.025 / 16 / 22.05 /32 /44.1 /48kHz
* Circuit Protect : Output short / over current protect
* USB Chip : TI - PCM2902
* LPF OPAmp : NS - LM4562
Audio Performance - Playback (1kHz sine wave, 2Vrms output, 16-bit / 48kHz)
Frequency response (From 40Hz to 15kHz) : 40Hz +0.05dB, 15kHz -0.13dB
Noise level (1kHz, A-Weighted) : -94.0dB
Dynamic range (1kHz, A-Weighted) : 94.0dB
THD% : 0.0072%
Stereo crosstalk : -94.7dB
Audio Performance - Recording (1kHz sine wave, 2Vrms output, 16-bit / 48kHz)
Frequency response (From 40Hz to 15kHz) : 40Hz +0.04dB, 15kHz -0.16dB
Noise level (1kHz, A-Weighted) : -91.1dB
Dynamic range (1kHz, A-Weighted) : 91.3dB
THD% : 0.0090%
Stereo crosstalk : -88.1dB
Connectivity
* USB interface (USB V1.1)
* Line Output : 1 of RCA - Playback jack
1 of RCA - Recording jack
System Requirements
* Intel® Pentium® 2, Celeron® 800MHz or higher computer system
* Microsoft® Windows 2000® (Service Pack 4) or Windows® XP (Service Pack 1)
* 128MB RAM
* Available USB port
Package Contents
* Fubar IO
* DC24V 0.5A power adapter
* RCA wire
* USB wire
* User manual
* Warranty card
* Wrench
|
|
_240.jpg)
|
|
|
|
|
|
|
| Addional |
|
|
|
|
|
|
|
